Fodder bucket with auger for telescopic handlers/wheel loaders

Fodder bucket with auger for telescopic handlers/wheel loaders

For feeding corn, pulp, beet, potatoes, short cut silage etc.

  • Questions: Ask your question
  • Standard equipment:

    For telescopic handlers or skid-steers. Can be used with any telescopic handler or skid-steer loader. All widths are possible, the size (height) can also be enlarged or reduced.

    Minimum hydraulic oil flow required; 40 l/min. (for the small bucket).
    The auger is 8 mm thick and thickened to 10mm towards the discharge opening. Diameter 300 mm. The auger is supported in the discharge opening by synthetic strips which ensure that the auger does not rotate on the base. They also ensure that no extra support is necessary which would obstruct discharging.
    Sheet thickness: 6 mm, provided with a stirrer as standard in order to prevent bridge formation.
    Standard width 1.3 m to 2.5 m.

  • Options:

    2nd side discharge
    Beet blade
    Electric remote control (also wireless)
    Weighing system
    Larger or smaller size (capacity)
    Retractable blade with teeth
    Hydraulic saw
    Silage grabber
    Cutter
    Bucket and/or channel in high-tensile hard steel
    Bucket and/or channel in COBRANOX (durable stainless steel, high resistance to abrasion and acids)
    Heavier drive motor (standard on buckets of 1300 l or more)

  • Specifications:
    CapacityShovel widthTotal widthWeight +/-
    780l. 1.3 1.35 436
    930l. 1.5 1.55 470 (500kg. with claw)
    1090l. 1.7 1.75 520
    1250l. 1.9 1.95 535
    1400l. 2.1 2.15 616 (815kg. with claw)
    1550l. 2.3 2.35 690
    1700l. 2.5 2.55 770